Publicité
Les langues disponibles
Les langues disponibles
Battery charger
Contact your dealer for battery charger's specifications.
Battery charging
Remove the battery from the vehicle�
Connect the charger wire, and ensure that the charging current is 1/10 A of the battery capacity, for
example: for the capacity of 10 Ah battery, its charging current should be 1 ampere;
Ensure that the battery is fully charged before mounting�
Do not remove the battery's sealing strip, or the battery will be damaged� Do not mount an ordinary
battery in this motorcycle, or the electrical system will not work properly�
When removing the battery, firstly disassemble the negative pole, and then the positive pole� During
mounting, the connection sequence of positive and negative poles is opposite to that of disassembly�
NOTE:
When charging a maintenance-free battery, always follow the instructions in this manual�
Battery maintenance
Clean the battery case with a soft brush dipped in a mixture of baking soda and water�
Use a wire brush to remove the corrosion of positive and negative lug plates and positive and negative
anodes;
Maintenance-free batteries require special chargers (constant low voltage/ampere)� Using traditional
battery chargers will reduce battery life�
If the vehicle is not in use for one month or longer, please remove the battery and place it in a dry and cool
place� Before remounting, fully charge the battery�
The battery must be removed from the vehicle when it is being charged�
ELECTRICAL SYSTEM & LIGHT SIGNALS
WARNING
124
Publicité
