JVC LT-22AM21 Guide D'utilisation page 6

Téléviseur grand écran acl tft de 22 po avec syntoniseur numérique

Les langues disponibles

How to attach the stand

NOTE:

• Unplug the AC cord from the AC INPUT terminal.

• Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid

any damage to the unit.

• Do not touch or press the TV-screen, glass might break under pressure.

Place the TV on its back onto a table.

Align the stand's bottom-plate (supplied) as seen here.

It will ﬁ t in only one direction.

Press it in direction of arrow until you hear a 'click'.

Please assure the " " mark on the stand is facing the

LCD panel side.

How to remove the stand

When you transport this product, remove the stand and pack ﬂ at against the back of the unit in the carton.

To remove the stand, remove the two (2) screws from the bottom (see A), and hold the stand on a ﬂ at surface

lifting one side of the unit until stand disconnects (see B).

For wall mounting, the base must be removed. To disconnect the base/stand remove the two (2) screws from the

back (see page 5).

Finally secure the bottom-plate with 2

screws (supplied).