Jeulin 488 016 Mode D'emploi page 39

Data Logging
REDY CO2 air / water Sensor
Ref : 488 016
The sensors management space opens automatically in the application.
The sensor appears in the sensors list.
In order to make sure that the desired sensor is detected, you can verify that the address
number written on the sensor screen, and that appearing in the application sensors list,
match.
This address number is unique for each sensor.
In the example above, it is the 136.
•
Start the connection by pressing on the desired sensor in the list. A temporary icon appears,
then the application confirms that the sensor is connected when the indications below show
on the screen
Note the apparition of the Bluetooth logo
message « Connected » in the end.
By default, the measurement mode in air (%) is selected.
Click on the sensor settings button in the window below :
ENGLISH
:
9.3 Mode and unit of Measurement Selection
next to the sensor name, as well as the
38