QLOCKTWO CLASSIC Manuel D'utilisation page 30

Setting the time
QLOCKTWO CLASSIC operates using the built-in high-precision quartz chronometer. The time can be set
manually using the buttons on the back of the QLOCKTWO CLASSIC.
The time is set manually using the buttons on the back of the QLOCKTWO (see fi g. 1):
Order of the buttons
seen from the back
( 1 ) = 1-minute steps ( 5 ) = 5-minute steps ( 60 ) = Hourly steps
By pressing the ( 1 ) button the internal seconds counter is set to zero.
This enables you to set the time accurately to the second.
10
46
All manuals and user guides at all-guides.com
Seconds mode
To select the seconds mode press the (
as large numbers in the matrix. The dots in the corners continue to represent the minutes between each
5-minute interval. By pressing any button QLOCKTWO resumes standard operation.
Setting the level of brightness
The LEDs' brightness automatically adjusts to the surrounding light. You can also manually set the level of
brightness. By repeatedly pressing the (
following pattern:
) button for longer than 3 seconds. The seconds will appear
) button you can change the level of brightness according to the
Maximum brightness
Normal brightness
Medium brightness
Low brightness
Automatic mode (the dots in the corners briefl y light up)
EN
11
47