Arm's Reach CO-SLEEPER Harmony Serie Manuel D'instructions page 3

Read all instructions BEFORE assembly and USE of this product.
．
A Side rail assembly (right)
．
B Side rail assembly(left)
．
C Leg assembly (right)
．
D Leg assembly (left )
．
E Screws (2 )
．
F Front Removable rail
G. Canopy assembly
H. Back top rail
．
I Stationary rail
．
J Storage basket rail
．
K Storage basket
．
L Ties of the Storage basket
M. Lining
．
N Female Safety buckle
．
O Wheels assembly
．
P Mattress
．
Q Anchor plate assembly
How to set up the Arm's Reach CO-SLEEPER brand bedside bassinet
WARNING:
Failure to follow these warnings and instructions could result in serious
injury or death.
A
B
D
D
J
G
®
Step 1
C
Align the Side rail assembly right (A) to the Leg assembly (right) C
then press the head of the V-clip in the end of the Side rail assembly
right (A), then push the rail to the plastic holder until it locks in place
per picture. Repeat the same process at the other end.
Step 2
A
Align the storage basket rail (J) to the plastic holder located on the leg
C
assembly (left) (D) as per picture, then press the head of the V-clip in
the end of storage basket rail (J) then push the rail to the plastic holder
until it locks in place per picture.
Repeat the same process for the other end to assemble the basket rails.
3
B
I
M
D
L
O
P
H
F
I
®
G
H
F
A
C
E
N
K
J
Q
K
J
( ),