Hitachi Koki WH 14DSL Instructions De Sécurité Et Mode D'emploi page 24

English
6. Duct socket:
This is used for tightening bolts and nuts on flange
sections of air conditioners, type ducts, etc.
Hexagonal width
Code No.
across flats
993658 15/32" (12 mm)
992613 1/2" (13 mm)
992615 9/16" (14 mm)
7. Corner attachment: (Model EW-14R)
Use this attachment only when the machine is
applied to the nut or bolt at the right angle.
B
Model
EW-14R
8. 9.5 mm adapter:
Use this adapter when using the socket that has a
square-head-drive dimensions of 9.5 mm.
B
Code No. Dimention B
317383 3/8" (9.5 mm)
9. Bit adaptor:
This is used for tightening small screws (M6).
NOTE:
This adaptor is set only on the anvil (drive angle) of
the main unit.
24
S
Dimention S
1/2"
(12.7 mm)
S
Dimention B, S
1/2" (12.7 mm)
S
Dimention S
1/2" (12.7 mm)
Code No.
991476
NOTE:
Specifications are subject to change without any
obligaiton on the part of the HITACHI.
S
Dimention S
1/2" (12.7 mm)