Hitachi Koki WH 14DSL Instructions De Sécurité Et Mode D'emploi page 10

English
2. Battery Charger (UC18YRSL)
SPECIFICATIONS
Model
Motor
Power mode
No-load speed
Save mode
Small screw
Capacity Ordinary bolt
High tension bolt
Tightening torque
Bit shank size
Drive
Rechargeable battery
Weight
Battery Charger (UC18YRSL)
Input power source
Charging time
Charging voltage
Charger
Charging current
Weight
10
Cord
Pilot lamp
5/32" – 5/16" (M4 – M8)
3/16" – 9/16" (M5 – M14)
3/16" – 15/32" (M5 – M12)
Power mode
Maximum 1,280 in-lbs.
Save mode
Maximum 710 in-lbs.
Tightening is 9/16" (M14) high
tension bolt, when fully charged
at 68°F (20°C) temp.
Tightening time: 3 sec.
1/4" (6.35 mm) Hex.
Nameplate
Fig. 2
WH14DSL
DC motor
0 – 2,600/min
0 – 2,000/min
{145 N·m 1,480 kgf·cm}
{80 N·m 820 kgf·cm}
BSL1430: Li-ion 14.4 V (3.0 Ah)
3.0 lbs. (1.4 kg)
Single phase: AC 120 V 60 Hz
Approx. 45 min.
DC 14.4 V 18 V
DC 14.4 V: DC 3.5 A
DC 18 V: DC 3.5 A
1.3 lbs. (0.6 kg)
Guide rail
WR14DSL
1/4" – 5/8" (M6 – M16)
1/4" – 15/32" (M6 – M12)
Power mode
Maximum 1,460 in-lbs.
{165 N·m 1,685 kgf·cm}
Save mode
Maximum 795 in-lbs.
{90 N·m 920 kgf·cm}
Tightening is 5/8" (M16) F10T,
when fully charged at 68°F
(20°C) temp.
Tightening time: 3 sec.
1/2" (12.7 mm) square
3.3 lbs. (1.5 kg)