Publicité
Les langues disponibles
Les langues disponibles
a.
Place the rollator on the floor so that it rests on the back of the frame and the rear wheels.
b.
Insert the front wheels into the frame. The wheels are securely attached when you hear an audible
"click".
c.
Remove the triangular wheels that are located on each side of the rollator.
d.
Insert the handle on the top of the rollator. Be sure to insert both handle tubes at the same time and
at the same height.
e.
When you are satisfied with the handle height, replace the triangular wheels to secure the handle in
place.
f. Attach the metal bracket of the plastic tray to the rollator frame.
g. Install the plastic tray on its metal support
h. The rollator is correctly installed
DMI-F-10_Annexe 2_Notice.11
Mai 2023
Page 7 sur 13
Publicité
