Technical Data - AKG C314 Mode D'emploi

6 Technical data

Type:
Polar pattern:
Sensitivity:
Frequency response:
Electrical impedance:
Recommended load impedance:
Equivalent noise level to IEC 60268-4:
Signal to noise:
Max. SPL for 0.5% THD:
Temperature range
Phantom powering:
Current consumption:
Connector:
Height
Width
Depth
Net weight:
Bass cut pad:
Preattenuation pad:
This product conforms to the standards listed in the Declaration of Conformity. To order a free copy of the
Declaration of Conformity contact sales@akg.com.
C314
1" large dual diaphragm back-plate condenser
cardioid, supercardioid, omnidirectional, figure 8
(cardioid): 20 mV/Pa (-34 dBV)
20 Hz to 20 kHz (see frequency response trace)
≤ 200 ohms
≥ 1000 ohms
8 dB (A)
86 dB(A) at 1 Pa
135 / 155 dB SPL (0 / -20 dB)
-10 °C +60 °C (14 °F - 140 °F)
48 V ±4 V to IEC 61938
≤ 3 mA
3-pin XLR (pin 2 hot)
160 mm (6.3 in.)
55 mm (2.16 in.)
43 mm (1.7 in.)
300 g (10.58 oz.)
100 Hz, 12 dB/octave
-20 dB
Technical data
33