StreamLight TLR-1 Série Instructions D'utilisation page 6

Mounting/Removal Procedure
MAKE SURE THAT THE FIREARM IS UNLOADED AND THE BREECH IS OPEN. IT IS IMPERATIVE THAT
SAFETY MEASURES BE EMPLOYED AT ALL TIMES WHILE HANDLING THE FIREARM.
1. The TLR is designed to be quickly attached or detached from the side of the weapon or accessory rail.
2. Loosen the rail clamp tension bolt.
3. Angle the TLR, placing the fixed portion of the rail clamp against the accessory rail and align
the rail key with the appropriate cross groove in the accessory rail.
4. Depress the tension bolt to open the rail clamp, rotate the TLR into place and
release the pressure on the tension bolt to "snap" the light in place.
5. Check for fit and tighten tension bolt until the TLR is securely attached to the firearm.
A coin should be used to obtain sufficient tightness.
997651 TLR1_TLR2 Op_Instructions Rev C.indd 6
Adjustable Portion
of Rail Clamp
Rail
Key
Rail Groove
Rail Clamp
Tension Bolt
Fixed Portion
of Rail Clamp
Rail
Rail Key
2/1/13 11:01 AM