StreamLight TLR-1 Série Instructions D'utilisation page 5

Rail Keys
Four polymer rail keys (included) allow the TLR to be attached to a variety of firearms: GL -Glock or "universal"
rails; 1913 – Mil Std-1913 (Picatinny); SW - TSW & 99, and Beretta - 90two.
Each rail key is stamped for easy identification and the keys
share a common key screw and hex nut. Each key has a hex
nut cavity in the base.
997651 TLR1_TLR2 Op_Instructions Rev C.indd 5
GL 1913
1. Select the appropriate key and insert a hex nut into the
2. Hold the rail key (hex nut side up) and the TLR
3. Insert the key into the TLR key pocket and use a 7/64"
NOTE: A key MUST be used or the TLR will slide
off the front of the rail under recoil.
6- Lock
(Latch will stop against top of door)
5- Swing Door Closed
TSW/99
Hex Nut Cavity
cavity in the base of the key. Note: Adjust the hex nut so
no portion protrudes from the key.
(key pocket side down) and align the two.
hex wrench to secure it with the key screw.
(Apply Force)
90two
2/1/13 11:01 AM