Candy CDIMQ 4D622PB/E Mode D'emploi page 91

5. LOADING DISHES
Using the upper basket
l
The upper basket is provided with mobile
racks hooked to the sides of the basket,
which can be regulated into 4 positions.
l
In the lowered position (A-A1) the racks
may be used for such items as: tea and
coffee cups, kitchen knives and ladles.
Also glasses with stems may be safely
hung on the ends of the racks.
l
In the upright position (B-B1) the racks
allow you to load dinner plates and soup
plates up to a maximum diameter of 19
cm. Plates should be loaded vertically
with the underside of the plate towards
the back of the dishwasher with a space
between each plate to allow water to pass
freely.
l
It is advisable to load large plates slightly
tilted towards the front to facilitate the
introduction of the basket into the machine.
l
The upper basket has been designed to
offer maximum flexibility in use and can be
loaded with glasses, cups, small plates and
small-sized bowls.
A standard daily load is represented in figs. 1
and 2.
Upper basket (fig. 1)
Upper basket (fig. 2)
Using the lower basket
l
Saucepans, oven dishes, tureens, salad
bowls, lids, serving dishes, dinner plates
and soup plates can be loaded into the
lower basket.
l
Place the cutlery in the plastic cutlery
holder with the handles pointing upwards
and place the cutlery holder on the lower
basket (fig. 6) making sure that the
cutlery does not get in the way of the
rotating arms.
91