Candy CDIMQ 4D622PB/E Mode D'emploi page 89

3. LOADING THE SALT
(Fig. A "1")
l
The appearance of white stains on dishes
is generally a warning sign that the salt
container needs filling.
l
On the bottom of the machine there is a
container for the salt for regenerating the
softener.
l
It is important to use only a salt that is
specifically designed
Other types of
quantities of insoluble particles which
over a long period of time may affect and
deteriorate the softener performance.
l
To add salt, unscrew the cap of the
container on the bottom and then refill the
container.
l
During this operation a little water will
overflow; but keep adding salt until the
container is full. When the container is
full, clean the thread of salt residue and
retighten the tap.
l
After loading the salt, it is recommended
running a complete washing cycle, or
COLD RINSE programme.
for dishwasher.
salt contain small
After loading the salt, YOU MUST run
a complete washing cycle, or the
PRE-WASH/COLD
programme.
l
The salt dispenser has a capacity of
between 1.5 and 1.8 kg and, for efficient
use of the appliance, it should be refilled
from time to time .
(Only for first start up) When the
appliance is used for the first time,
after completely
container, it is necessary to add water
until the container overflows.
89
RINSE/REFRESH
filling the salt