Zyxel NWA3550 Guide De Mise En Route Rapide page 8

3.2 Configure Wireless Settings
1 Click WIRELESS in the
navigation panel. The
following screen
appears.
The wireless stations and the NWA3550 must use the same SSID,
channel ID and encryption settings for wireless communication.
WLAN Interface: Ensure that WLAN1 is selected.
Operating Mode: Ensure that Access Point mode is selected.
802.11 Mode: Select the wireless standard you want your network to use. If you are not
sure which to select, select 802.11b+g.
Choose Channel ID: Select the wireless channel you want your network to use. To have
the NWA3550 automatically select a channel, click Scan instead.
SSID Profile: Select the SSID profile you want to configure for network access from the
drop-down list box. This example uses the SSID03 profile.
2 Click Apply to save your settings.
ENGLISH
8