Zyxel NWA3550 Guide De Mise En Route Rapide page 12

If the NWA3550 cannot communicate with the network, ensure that the
NWA3550 is using an IP address on the same subnet as the switch / router.
4 Install the Hardware
Complete the following procedures to install the NWA3550 on a pole or wall.
4.1 Hardware Mounting
In general, the best location for the access point is at the center of your intended wireless
coverage area. For better performance, mount the NWA3550 high up in an area that is free
of obstructions.
4.1.1 Package List
You need the following:
1 One Wall/Pole Bracket
2 One Articulation Bracket
3 One Pole Mounting Bar
4 Three M8*110 Screws
5 Three M8 Washers
6 Three M8 Spring Washers
ENGLISH
7 One M8 Nut
8 Four M5*12 Screws
9 Four M5 Washers
10Four Wall Mounting Screws
11Four Masonry Plugs
12