Zyxel NWA3550 Guide De Mise En Route Rapide page 11

3.3 Configure IP Settings
1 You need to set your
NWA3550's IP address to be
in the same subnet as your
network. Click IP in the
navigation panel.
Select Get automatically from
DHCP if you want to have a
DHCP server on your network
assign an IP address to the
NWA3550.
If you have a specific IP address
to use, select Use fixed IP
address and enter it along with
the subnet mask and gateway
IP address.
Click Apply. The NWA3550 now
uses the new IP settings; you
can no longer connect to the
NWA3550 using the default IP
address.
If you change the NWA3550's IP address, you must use the new IP
address when you next access the web configurator. If you select Get
automatically from DHCP, check your DHCP server to determine the IP
address it assigns to the NWA3550. Refer to your DHCP server's
documentation for more information.
2 If you changed your computer's IP address in
setting.
3 Change the wireless settings in the wireless stations to match those of the NWA3550.
Refer to your wireless adapter's documentation.
The NWA3550 is now ready to connect to your switch or router. You can do this now, or
once you have attached the antennas and mounted the NWA3550.
ENGLISH
Section
11
2.1, return it to its previous