Télécharger Imprimer la page

Victron energy Phoenix Multi Compact 12/1200/50 Manuel D'instructions page 18

Masquer les pouces Voir aussi pour Phoenix Multi Compact 12/1200/50:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

4. SETTINGS
Settings may only be changed by a qualified engineer
Carefully read the instructions before changes are made.
Batteries should be placed in a dry and well-ventilated area during charging.
4.1 Default Settings
Inverter Voltage
Charger on/ off
Charge curve
Charging Current
Absorption Voltage
Absorption Time/ Maximum Absorption Time
Float Voltage
Repeated Absorption Time
Repeated Absorption Interval
Bulk Protection
AC Waveform Check
PowerAssist (MultiPlus only)
Generator/ Shore Current
System frequency
AES (automatic economy switch)
4.2 Settings which can be changed with the dipswitches
Type
Battery Type
1
Sonnenschein
(default)
Dryfit A200 Gel
2
Traction
(tubular cell)
3
Semi Traction
(flat plate)
4
Low antimony
1
The optimal absorption voltage for flat plate lead acid batteries is subject to mechanical and
chemical properties.Batteries with high antimony content can typically be charged with a
lower absorption voltage than batteries with low antimony content. (Please refer to our book
"Electricity on Board" downloadable from our website www. victronenergy.com for details and
suggestions about charging batteries). Contact your battery supplier for the correct charge
voltages and change (with VE-configure) the voltage settings if required. The default charge
current setting is 75% of the maximum charge current. This current will be too high for most
applications. For most battery Types the optimal charge current is 0.1-0.2x the battery
capacity.
14
- Multi Compact/ MultiPlus Compact = Automatic
- Inverter Compact = 50 Hz
Absorption voltage
14.4 V 28.8 V 57.6V
15.0 V 30.0 V 60.0V
1
14.4 V 28.8 V 57.6V
1
14.8 V 29.6 V 59.2V
230 Vac
on
Adaptive charging, gel cell
75% of maximum charging current
14.4V / 28.8V / 57.6 Vdc
4 hours
13.8V / 27.6V / 55.2 Vdc
1 hour
7 days
on
on
on
12A
off
Float voltage
13.8 V/
27.6 V/
13.2V
26.4V
13.8 V/
27.6 V/
13.2V
26.4V
14.0 V/
28.0 V/
13.2V
26.4V
14.0 V/
28.0 V/
13.2V
26.4V
Maximum
absorption
time
55.2V
4 hours
52.8V
55.4V
6 hours
52.8V
56V
5 hours
52.8V
56V
5 hours
52.8V

Publicité

loading