NOMA 052-4744-2 Guide D'utilisation page 8

6
Toll-free: 1-866-827-4985 · model no. 052-4744-2
ASSEMBLY
4. Motor housing assembly
· Remove the housing screws and washers from the
mounting bracket (see Fig. 10).
· Slide motor housing over motor assembly.
Secure to the sides of mounting bracket with
housing screws (see Fig. 11).
5. Blade and blade bracket
· Using the fan blade screws, attach the fan
blades to the fan blade arms with the
desired finished side faced-down on the
fan blade arms (see Fig. 12).
Note:
blades. Depending on personal preference,
choose the side that best suits the decor or
furniture of your room.
6. Attach blade assembly to motor
· If there are plastic tabs shaped like bottle caps, remove
and discard them. These are stabilizers that protect the
motor during shipping.
· Remove the screws on the bottom of the motor
and use them to attach the blade assembly to
the motor. Ensure the screws are tightened
(see Fig. 13).
7. Connect switch housing
· Remove the screws from the switch housing
cap and save for use in next step (see Fig. 14).
· Connect the wire inside the switch housing
cap by snapping the male and female
connectors together. Match white wires
together and blue wire to black wire together
(see Fig. 15).
All manuals and user guides at all-guides.com
This ceiling fan includes 5 dual-finished
10
Mounting bracket
Housing screws
11
Motor
Motor housing
12
Blade arm
13
14
15
Housing screws
Blade screws
Blade
Motor
Screw