Publicité
Les langues disponibles
Les langues disponibles
4
Toll-free: 1-866-827-4985 • model no. 052-4744-2
ASSEMBLY
· Insert the "T" bar end of motor support bar through
rectangular opening on mounting bracket for hands-
free wiring and later motor assembly (see Fig. 4).
2. Wiring instructions
IMPORTANT:
a licensed electrician for advice. They must be grounded for safe operation.
WARNING!
fuse box before wiring.
Remote and Receiver Pairing
Codes are set by pushing the location of the dip switches located on the transmitter and receiver
up or down. It is important that the code used for both the remote and receiver are identical for
the two devices to be able to communicate; otherwise the remote will not be able to control
the fan (see Fig. 5a).
If you plan to install more than one fan then each fan will require the remote and receive to
use a unique code, or else one remote will be able to control more than one fan.
Receiver assembly
Position the receiver into the motor support
bar with the air holes of the receiver facing
outward and wires upward (see Fig. 5b).
Making Connections
Between fan and receiver:
·
Connect the black wire marked "L" from the fan to the black wire marked "TO MOTOR L" from
the receiver.
·
Connect the blue wire marked "FOR LIGHT" from the fan to the blue wire marked "FOR LIGHT"
from the receiver.
·
Connect the white wire marked "N" from the fan to the WHITE wire marked "TO MOTOR N" from
the receiver.
Between receiver and mains:
·
Connect the black live wire marked "AC IN L" from the receiver to the live wire (typically black) from
the outlet box.
·
Connect the white neutral wire marked "AC IN N" from the receiver to the neutral wire (typically
white) from the outlet box.
·
Connect the green ground wires from the mounting bracket and nylon ball to the ground
wire (bare or green) from the outlet box.
All manuals and user guides at all-guides.com
If you are not sure if the electrical outlet box and fan are grounded, contact
4
Motor support bar
5a
Receiver
5b
Motor support bar
Receiver holder
Mounting bracket
6
7
Publicité
