Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Adding a Camera
The system supports up to 3 CAMIP21 cameras.
1.
Connect the additional camera to the Wifi router using the included Ethernet cable. The Wifi router
must be the same router to which your mobile device is connected.
2.
Click the Add Camera icon. The System Information panel appears. Specify a name or use the
default name for your camera in the System Name field.
3.
Enter the DID code for the camera located in the DID column.
4.
Enter the default password (123456) in the Security Code field.
5.
Click Save to complete the camera settings. The app attempts to establish the camera connection.
Once the camera is successfully connected, the status will be shown in the left upper corner.
6.
Repeat steps 2 to 5 to add more cameras.
Setting the PIN Code
This function will ask for the PIN code prior to enabling access to the user.
1.
Activate the Enable Lock When Starting function and enter your (secret) PIN code.
2.
Enter your PIN code again to confirm.
Have you lost your PIN code? Just uninstall the app and reinstall it on your
mobile device.
Notify Function
Your CAMIP21 camera supports motion detection function. Any motion-triggered event detected by the
camera will be sent to your mobile device.
V. 02 – 01/07/2015
CAMIP21
®
iOS
REMARK
11
®
Android
©Velleman nv
Publicité
Table des Matières
