Publicité
INSTALLATION GUIDE AND USER MANUAL
INSTRUCTIONS D'INSTALLATION
Assurez-vous que les plaques de cuisson soient correctement installées et raccordé à la
terre par un technicien qualifié. Il est de la responsabilité du technicien de s'assurer que
vos plaques soient correctement installées. Les situations causées par une mauvaise
installation ne sont pas couvertes par la garantie. Les frais occasionnés par de telles
situations ne seront pas payés par le fabricant des plaques.
Les tests d'étanchéité de l'appareil doivent être e ectués conformément aux instructions
du fabricant, ou conformément aux codes du bâtiment locaux et aux réglementations en
matière de gaz dans votre région.
CONNEXIONS DE GAZ (TOUTES LES UNITÉS)
AVIS AUX CONCESSIONNAIRES D'APPAREILS MASSACHUSETTS:
Assurez-vous que ce document est inclus dans tous les appareils haut de gamme de
cuisinière à gaz vendus aux consommateurs dans l'État du Massachusetts.
GAS CONNECTIONS (All Units)
NOTICE: Massachusetts law requires the following:
- Appliances must be installed by a licensed plumber or gas fitter.
- Appliances must be connected with a three(3)foot(36"maximum length) Flexible gas
connect or and a "T" handle type manual gas valve in the gas supply line to the appliance.
Have the dealer where you purchase your new range top install it or have them
recommend a qualified installer. Installation must conform with local codes. In the absence
of local codes, the installation must conform with the National Fuel Gas Code, A
NSIZ223.1-Latest Edition in the U.S.A. or the CAN/CGAB149.1or.2 Installation Codes in
Canada.
The range top should be connected to the supply line with 1/2-inch black iron pipe or a
certified flexible type stove connector. To prevent gas leaks, put an approved sealing
compound which is resistant to liquefied petroleum gases on all threaded connections.
IMPORTANT: Do not apply pressure directly to the range top manifold pipe when
tightening supply connections. The manifold pipe should be held securely at the pressure
regulator to prevent twisting. Hold the pressure regulator with a wrench during the
tightening of the connection, or the manifold pipe may be twisted and split and cause a
dangerous leak.
The installation of range tops designed for manufactured (mobile) home installation must
conform with the Manufactured Construction and Safety, Title 24 CFR, Part 3280,
[formerly the Federal standard for Mobile Home Construction and Safety, Title 24, HUD
(Part 280)] in the U.S.A. or C.S.A. Standard CAN/CGAZ240.4.2in Canada or, when such
standards are not applicable, with local codes.
6
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
Publicité
