Publicité
Les langues disponibles
Les langues disponibles
RONDA CAL. 5020.B (continue)
ADJUSTING THE CHRONOGRAPH HANDS TO ZERO POSITION
Push-button A
CENTRE STOP-SECOND
HOUR
COUNTER
MINUTE
COUNTER
Push-button A
Example: One or several chronograph hands are not in
their correct zero positions and have to be adjusted
(e.g. following a battery change).
Pull out the crown to position III.
(All 3 chronograph hands are in their correct
or incorrect zero position.)
Push-button B
Press push-buttons A and B depressed
simultaneously for at least 2 seconds.
(The centre stop-second rotates by 360°
corrective mode is activated.)
Adjusting the centre stop-second
Single step:
Continuous: A long
Adjusting the next hand B
Adjusting the minute counter hand and the
hour counter hand (mechanical coupled)
Single step:
Continuous: A long
Returning the crown to position I.
Termination of the chronograph hands
adjustment (can be carried out at any time).
A 1 x short
A 1 x short
www.rodania.com
l
61
Publicité
