Rodania VALJOUX 7750 Mode D'emploi page 55

RONDA CAL. 5030.D (continue)
ADJUSTING THE CHRONOGRAPH HANDS TO ZERO POSITION
Example: One or several chronograph hands are not in their correct zero positions and have to be adjusted (e.g. following
a battery change)
Push-button A
HOUR COUNTER
MINUTE COUNTER
Push-button A
Push-button B
Adjusting the centre stop-second
A 1 x short
Single step:
Continuous: A long
Adjusting the next hand B
Adjusting the hour counter hand (pos. 6h)
A 1 x short
Single step:
Continuous: A long
Adjusting the next hand B
Adjusting the minute counter hand (pos. 9h)
Single step: A 1 x short
A long
Continuous:
Returning the crown to position I. Termination of the chronograph hands
adjustment (can be carried out at any time).
Pull out the crown to position III. (all 3 chrono-
graph hands are in their correct or incorrect
zero position.)
Keep push-buttons A and B depressed
simultaneously for at least 2 seconds. (The
centre stop-second rotates by 360°
corrective mode is activated.)
www.rodania.com l 55