Sony MSAC-FD2M Mode D'emploi page 5

BSet t ing Up
Inst alling lit hium bat t eries
The power source for the MSAC-FD2M consists of two lithium button
batteries (CR2016).
( The CR2016 lithium battery will be indicated below simply as "battery.")
Before beginning operation, follow the steps shown below to install the
batteries.
1
Remove battery covers.
Place the MSAC-FD2M on a flat surface. With your finger, press and
hold the upper groove on the battery cover. Turn the battery cover
counterclockwise until it clicks and then remove the battery cover.
2
Insert batteries.
Insert two new batteries into the battery wells, making sure that the
plus sign faces upward.
Downloaded from:
electrode
https://www.usersmanualguide.com/
Continued
5-GB