Sony MSAC-FD2M Mode D'emploi page 16

Using M SAC-FD2M <M acint osh> (cont inued)
* After [MSAC-FD1 Utility] starts, insert MSAC-FD2M.
If the application does not start, the menu below appears.
Always press [Eject] when this menu displays. Then repeat the steps
above from the beginning.
Do not select [Initialize]. Selecting [Initialize] will cause the computer
to crash.
3
Insert Adaptor
When the startup menu appears, insert MSAC-FD2M into the floppy
disk drive. Make sure "Memory Stick" is correctly attached.
16-GB
Downloaded from: https://www.usersmanualguide.com/