Publicité
Les langues disponibles
Les langues disponibles
26
Operating instructions
Bridge function
The Bridge function connects two cooking zones and they operate as one.
First set the heat setting for one of the cooking zone.
To activate the Bridge function touch
the control sensors.
To deactivate the Bridge function touch
Automatic Heat Up
You can get a necessary heat setting in a shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat setting for some time (see the illustration),
and then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a cooking zone:
1.
Touch
2.
Immediately touch the necessary heat setting. After 3 seconds
play.
To stop the function change the heat setting.
Switching the Power function on and off
The Power function makes more power available to the induction cooking zones. The Power
function is activated for 5 minutes at most. After that the induction cooking zone automat-
ically switches back to heat setting 14. To switch on, touch
touch a heat setting
12
11
10
9
8
7
6
5
4
3
2
1
0
1
2 3 4 5 6 7 8 9 10 11 12 13 14
(
comes on in the display).
-
.
. To set or change the heat setting touch one of
. The cooking zones operate independently.
comes on in the dis-
,
comes on. To switch off,
Publicité
