KRESS KG161 Serie Mode D'emploi page 8

ASSEMBLY & OPERATION
NOTE: Before using the tool, read the
instruction book carefully.
WARNING:To reduce the risk of injury
from thrown objects or contact with the
cutting attachment, never operate the trimmer
without a properly mounted debris guard. Keep
bystanders at least 50 ft. (15 m) away.
BEFORE OPERATION:
Assembling the shaft (See Fig. A)
A
EN
Lock the shaft into fully extended position with the
bolt and nut.
Assembling the front handle (See Fig. B1,
B2, B3, B4)
B1
8
B2
B3
B4
1.Attach the Front Handle and lower clamp on the
shaft.
2.Put the bolt through the holes.
3.Tighten the Front Handle.
WARNING: Adjust the front handle between
the soft sleeve and the clamp so as to make
sure your front arm is straight when using the
trimmer. (See Fig. B3)