KRESS KG161 Serie Mode D'emploi page 12

Replace the spool (See Fig. K1, K2, K3, K4
K1
K2
EN
K3
12
)
K4
1. Take off the cap and remove the old spool.
2. Put the empty spool in and place on the cap to
wind new line in.
Trimmer Line Maintenance
Periodically soak you package of string trimmer line
in a bucket of water for a day or two to reduce line
breakage, wear and line welding. (twice per season)
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0℃-45℃ (32℉-113℉).
The recommended ambient temperature range for
the charging system during charging is 0℃-40℃
(32℉-104℉).
TRANSPORTING
1. When transporting your trimmer by hand, hold
the middle of shaft to make sure that your
machine is parallel to the ground.
2. When transporting your trimmer in a vehicle,
secure and position it to prevent damage.
STORING
1. Remove the battery pack from the trimmer before
storage.
2. Store the trimmer in a dry and secure place that
is inaccessible to children and other unauthorized
people.
CLEANING
1. Do not use aggressive detergents or solvents.
Clean the machine after use with a moist cloth
dipped in mild detergent.
2. Keep the socket free of foreign matters, and
clean with a soft and dry brush or cloth.
3. Do not spray water onto the motor and electrical
components.
4. Do not use a pressure washer to clean your
machine.