KRESS KG161 Serie Mode D'emploi page 10

Installing & removing the battery pack (See
Fig. D3)
D3
B3
1.Slide the battery pack into the battery
compartment until you hear a click.
2.Press the battery release to release battery pack
from your tool.
Note: After recharging, insert the battery pack into
tool's battery port. A simple push and slight pressure
B4
will be sufficient.
OPERATION:
Starting/Stopping the trimmer (See Fig. E)
EN
E
C
Press the Operator Presence Switch first, then press
the switch trigger to start the machine.
WARNING:
rotate after the trimmer has been switched
off; wait until it has completely stopped then lay
down the tool.
D1
10
15m (50ft)
The cutting head continues to
100%
0%
ECO Speed (See Fig. F, G)
F
F
G
G
For longer run times and trimming in delicate areas,
press the ECO button prior to depressing the throttle
trigger. The trimmer will operate at a lower rpm.
Bump-head feed system
H
The trimmer is equipped with a bump-head system.
Just bump the trimmer head while the machine is
running, new line will feed out.
15m (50ft)
15m (50ft)
15m (50ft)
15m (50ft)
(See Fig. H)
15m (50ft)