Makita CL183D Manuel D'instruction page 8

Corner nozzle +Extension wand
(Straight pipe)
► 1. Corner nozzle 2. Extension wand 3. Cleaner body
In tight quarters where the cleaner itself cannot
squeeze in, or in high places hard to reach, use this
arrangement.
Cleaning without nozzle
You can pick up powder and dust without nozzle.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off
before attempting to perform inspection or
maintenance.
Symptom
Weak suction power
Not working
NOTE:
• Do not attempt to repair cleaner by yourself.
3
2
1
Area to be investigated
Is capsule full of dust?
Is filter clogged?
Is battery exhausted?
Is battery exhausted?
Cleaning
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening, dust bag/dust pack
mounting area and the dust stopper.
CAUTION:
• Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
Wash the filter in soapy water when it is clogged with dust
and the cleaner power becomes small. Dry it out thor-
oughly before use. An insufficiently dried filter may cause
poor suction and shorten the service life of the motor.
Do not blow dust sticking on the cleaner by air duster. It
brings dust into the housing and causes failure.
Things to Check Before Asking for
Repairs
Fixing method
Empty dust from capsule.
Dust down or wash filter.
Recharge battery.
Recharge battery.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
8 ENGLISH