Fig.13
Table 3
7K/9K/12K/16K
Cross sectional area
18K/21K/24K/28K
Wiring diagram of indoor and outdoor unit
Fig.14
Notes:
Earthing screw must use special screw(stainless machining screws or copper
•
screws M4)
Ensure that all wires are securely connected, will not loose or separate.
•
Ensure that wire connections are carried out according to the wiring diagram of the
•
air conditioner.
The above figures are only schematic, and they may be slightly different from the
•
actual appliances you select.
Power con-
necting wires
Max. Length
10m
≥2.5 mm2
≥1.5 mm2
≥2.5 mm2
Signal control
wire
10m
≥1.5mm2
≥1.5 mm2
31
Power cord
5m
≥2.5 mm2