Publicité
Les langues disponibles
Les langues disponibles
3172743-002 In-Fr. (ELECTROLUX) 17/10/14 09:33 Página 14
14
www.electrolux.com
If you wish to change the programming,
you should cancel the function by
simultaneously pressing the
buttons. Then set the baking time and an
end time again.
6.10 Setting the Food Probe
The Food Probe measures the temperature
in the meat to be roasted.
The oven switches off automatically when
the probe detects a preselected
temperature.
Roasting with the Food Probe provides an
optimum roasting result regardless of the
type of meat or fish to be roasted.
• Only use the original Food Probe that
comes with the oven.
• Insert the probe in the meat before
starting roasting.
• Insert the probe in one side of the meat
to be roasted, so that the point ends up
in the middle of the meat.
• Insert the probe in the meat all the way
to the handle.
• We recommend turning the meat
halfway the process. Take this into
account when inserting the probe.
• The point of the probe should not touch
any bones or fat zones. Neither should
it end up in a hollow zone, as may be
the case for poultry.
PLEASE NOTE
When the power is interrupted, the
programming of the timer is deleted
and the figures 00:00 appear in the
display. Set the current time of day
and programme the timer again.
and
6.11 Using the Food Probe
1. Place the meat to be roasted with the
Food Probe in it in the oven.
2. Remove the cover from the
connection point at the top right of
the oven and insert the plug of the
probe into the connection point.
3. As soon as the Food Probe is
connected to the oven you see the
temperature measured by the probe on
the left in the display and the
temperature selected standard for the
probe (80º C) on the right. The display
alternately shows the current time of
day and the temperature set and the
temperature measured by the probe.
IMPORTANT
If the Food Probe measures very low
temperatures (for very cold
products), the display shows 30ºC. If
the Food Probe measures very high
temperatures, the display shows
99ºC.
An acoustic signal goes off if the
probe is not connected properly.
4. Simultaneously press the buttons
and
.
Publicité
