Whispbar K327W Instructions De Montage page 4

EN
Fitting Kit
K327W
Tracks can be fitted either parallel or
tapered to match vehicle roof shape.
Parallel Tracks:
A1 & A2 are equal
B1 & B2 are equal
C1 & C2 are equal
D1 & D2 are equal
Tapered Tracks:
A1 & A2 are different
B1 & B2 are equal
C1 & С2 are equal
D1 & D2 are equal
With help from another person, carefully lay
tracks over the masking tape and mark
rivet hole positions with a pencil or pen.
Take care not to move the tracks until the
holes are marked out.
Use drill bit supplied, to drill rivet holes in
marked positions.
Take care not to drill too deep.
Vacuum and clean swarf from channel.
Treat holes to prevent corrosion.
4