LENCO DIR-261 Mode D'emploi page 23

FM menu.:
If scan setting is selected, the following page will appear, turn the NAVIGATE knob on the
unit or press the navigate button on remote control to set to YES or NO.
If Audio setting is selected, the following page will appear, turn the NAVIGATE knob on the
unit or press the navigate button on remote control to set to YES or NO.
NOTE: If the reception is weak, please extend the telescopic antenna, or relocate the unit to
get better reception.
Aux in mode:
Aux in mode plays audio from an external source such as an MP3 player.
To play audio with Aux in mode
1. To avoid sudden loud volume, turn the volume low on both radio and, if adjustable, the
audio source device.
2. Connect the external audio source to the Aux in 3.5mm stereo socket.
23