BaBylissPro 4rtists FX8705E Mode D'emploi page 11

ZERO GAP
Step 1.
Before placing the blade into
the adjustment tool, use the
screwdriver provided to loosen the
tension screws, without removing
them completely from the blade
holder.
REGULAR
ZERO GAP
Step 2.
Place the blade into the adjustment
tool in the side labelled 'Zero Gap'.
Step 3.
Push the blade guide up as far as
the adjustment tool allows, so the
moving blade sits closely with the
top of the adjustment tool. The
blades will now be flush with each
other.
11
Moveable
part