Publicité
Les langues disponibles
Les langues disponibles
18"
(45.7 cm)
1-1/4"
(3.2 cm)
11-1/4"
(28.6 cm)
2-1/2"
(6.4 cm)
1-1/2" OD
Product Information
Applicable product:
Drop-in rim style
Fixture*:
Bathing well:
Basin area bottom
Basin area top
Weight
To overflow:
Water depth
Capacity
* Approximate measurements for comparison only.
Drop-in cutout dimensions:
70-1/2" (179.1 cm) x 34-1/2" (87.6 cm)
Blower motor:
Heater
300 W
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor:
1064192-1-C
72" (182.9 cm)
3/4" (1.9 cm)
K-1124P-G
51-3/8" (130.5 cm) x 21" (53.3 cm)
64-1/2" (163.8 cm) x 30-1/2" (77.5 cm)
100 lbs (45.4 kg)
15" (38.1 cm)
72 gal (273 L)
V
Hz
120
60
120 V, 15 A, 60 Hz
Notes
Install this product according to the installation guide.
Floor support under product must provide for a minimum of
41 lbs/square foot (197 kg/square meter) loading.
This product is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with overhead shower.
The hot water supply should be 70% of capacity or greater.
Installations will vary.
A blower motor access panel is required.
Fixture conforms to CSA B45 and ANSI Standard Z124.1.2. All
dimensions are nominal.
A
5
2
No change in measurements if connected
with drain illustrated. (K-7272)
Blower Motor Access
20" (50.8 cm) W x
15" (38.1 cm) H
36" (91.4 cm)
19"
(48.3 cm)
1-1/2"
(3.8 cm)
Drop-In
Rim Detail
Kohler Co.
Publicité
