EXALTA EL-213 Manuel D'instructions page 13

GB
1 - Tourmaline ceramic heat elements
Iron with interchangeable plates:
2 - Straightening plates
3 - 4-wave crimping plates
4 - 5-wave crimping plates
5 - 7-wave crimping plates
6 - Operation indicator
7 - Temperature selector 160 ° C to 230 ° C
8 - Swivel cord
WARNINg
The iron reaches high temperatures in seconds. Skin - especially ears,
eyes, face and neck - must not come in contact with the hot surfaces
of the appliance once it is plugged into the mains.
The iron becomes very hot when maximum temperature is set,
therefore extra attention must be paid to avoid incorrect operation
or wrong temperature, which may overheat, or even burn, hair. When
using the iron for the first time always select a low temperature
option, and test on just a strand to ensure it is suitable for your hair
type.
INSTRUCTIONS FOR USE
Ensure your hair is clean, dry and untangled before using the appliance.
Select plates according to desired hairstyle (Straightening plates- 4-wave
crimping plates - 5-wave crimping plates - 7-wave crimping plates)
Insert and remove plates as shown in the pictures below:
Insert the plug into the outlet. Use the thumbwheel switch on the
appliance to switch it on and select desired temperature. The blue LED
lights up to indicate device operation.
The appliance is ready to be used in a few seconds.
13