Télécharger Imprimer la page

Teac AD-600 Manuel Du Propriétaire page 32

Publicité

C A
B
A B C
D
32
Playback 2
< Even when a disc is set on a tray, "no
disc" is displayed untill a disc is selected
by pressing the corresponding DISC NO
button.
D
A
To start playback
When a disc has already been selected,
press the PLAY button(y ) to start
playback. (The DISC NO. button cannot
be used to start playback.)
The playback starts from the first track of
the selected disc. The playback stops
when the last track of DISC 3 is played.
< If the corresponding DISC NO. button is
pressed when the tray is open, the tray
will close automatically and start
playback.
B
To stop playback
Press the STOP button(H ) to stop
playback.
C
To suspend playback temporarily (pause
mode)
Press the PAUSE button(J). Playback
stops at the current position.
To resume playback, press the PAUSE
button(J) or PLAY button(y).
D
To change the disc
Press the OPEN/CLOSE 1, 2 or 3
button(L) to open the disc tray, change
the disc, and press the button again to
close the tray.
< You can change discs that aren't being
played, even if another disc is being
played.
ENGLISH
Lecture 2
< La mention "no disc" est affichée, même
si un tiroir contient un disque, aussi
longtemps que vous n'avez pas choisi un
disque en appuyant sur la touche DISC
NO. qui lui correspond.
A
Pour commander la lecture
Après avoir sélectionné un disque,
appuyez sur la touche PLAY(y ) pour
commander la lecture. (La touche DISC
NO. ne peut pas être utilisée pour
commander la lecture.)
La lecture commence au début de la
première plage musicale du disque
choisi. La lecture s'arrête à la fin de la
dernière plage musicale du dernier
disque (DISC 3).
< Si vous appuyez sur la touche DISC NO.
correspondant à un tiroir ouvert, le tiroir
se ferme et la lecture du disque
commence automatiquement.
B
Pour arrêter la lecture
Appuyez sur la touche STOP(H ) pour
arrêter la lecture.
C
Pour interrompre la lecture (pause)
Appuyez sur la touche PAUSE(J ). La
lecture
s'interrompt
correspondant.
Pour reprendre la lecture, appuyez sur la
touche PAUSE(J ) ou sur la touche
PLAY(y).
D
Pour changer les disques
Appuyez sur la touche OPEN/CLOSE 1, 2
ou 3 de manière à ouvrir le tiroir
correspondant, changez le disque puis
appuyez une nouvelle fois sur cette
touche pour fermer le tiroir.
< Vous pouvez changer un disque qui n'est
pas en cours de lecture, même si un
autre disque est en cours de lecture.
FRANÇAIS
au
point

Publicité

loading