Product Overview (Fig. 1); Important; Setting The Temperature - Philips HI5900 Série Mode D'emploi

6 English
Introduction
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that
Philips offers, register your product at www.philips.com/welcome.
Read this user manual, the important information leaflet, and the quick start guide carefully before
you use the appliance. Save them for future reference.

Product overview (Fig. 1)

1 Water supply hose
2 Temperature dial
3 Steam trigger/Steam boost
4 'Iron ready' light
5 CALC-CLEAN button with light
6 Iron platform
7 Water tank release lever
8 Detachable water tank
9 On/off switch
10 Mains cord with plug
11 Smart Calc-Clean container

Important

Perform the descaling process regularly for great steam and a prolonged lifetime of the appliance.
Recommended water to use
Distilled or demineralized water if you live in an area with hard water.
Type of water to use
This appliance has been designed to be used with tap water. However, if you live in an area with hard
water, fast scale build-up may occur. Therefore, it is recommended to use distilled or demineralized
water to prolong the lifetime of the appliance.
Warning: Do not use perfumed water, water from the tumble dryer, vinegar, starch,
descaling agents, ironing aids, chemically descaled water or other chemicals, as they
may cause water spitting, brown staining or damage to your appliance.
Caution: Be careful when you remove the water tank. The area near the tip of the iron may be hot
(Fig. 2).

Setting the temperature

To set the required ironing temperature, turn the temperature dial to the appropriate position. The
appliance adjusts the steam automatically, depending on the ironing temperature set.
Temperature setting
SYNTH to 1
Automatic setting Fabric type
Synthetic fabrics (e.g., acetate, acrylic, nylon,
polyamide)