Publicité
3. Pull out the air filter element.
4. Separate the foam cover from the air filter el-
ement.
5. Tap the element lightly to remove most of the
dust and dirt. Blow out the remaining dirt with
compressed air. If the element is damaged,
replace it.
6. Wash the foam cover gently but thoroughly in
water or solvent.
WARNING
_
When using solvent to clean the foam cover,
always use parts cleaning solvent. Never use
low flash point solvents or gasoline to clean
the foam cover because the engine could
catch fire or explode.
_
7. Squeeze the excess solvent out of the filter
and let it dry.
CAUTION:
_
G
Do not twist the foam cover when squeez-
ing it.
G
Do not add oil to the foam cover.
_
8. Inspect the foam cover. If damaged, replace
it.
8-35
Publicité
