Yamaha CRX-E300 Mode D'emploi page 20

CD OPERATIONS
To stop program play mode
Press &.
Note
• ⁄/› or $/! can be used during program play to skip
to tracks within the program.
To check program data
Press & to stop program play.
1.
Press PROG. Then each time you press ⁄/› /
2.
$/!, the track number and the program number
are displayed in the order of the program.
To change program data
1. Follow the preceding procedure described in "To
check program data."
2. Display the track number to be changed by pressing
⁄/› / $/!.
3. Press the numeric button of the desired track. The
previously programmed track will be cleared from
memory and the new one will be programmed.
To delete all program data
When program play is stopped, press &.
Note
• Turning the unit to the standby mode or opening the disc tray
also deletes the program data.
18