Bosch G 10 CL-1 Installation Instructions page 31

BUS
IP-class
Table 12
3 Installation
DANGER
Danger to life from electric shock!
Touching live electrical parts can cause an electric shock.
▶ Before installing this product: disconnect the indoor unit from the mains voltage.
▶ Before commissioning: mount the covers of the electronics.
▶ Install the Gateway in the indoor unit ( Fig. 2 to 17).
-or-
▶ For Climate 5000i U/L (4CC, D, CF): connect the gateway via the connection
accessory ( Fig. 18 = technical documentation of the connection accessories
G 10 CLC).
Indoor units of type Climate 5000i U/L (4C) ( Fig. 12 to 17) have a gateway holder
(H) and a connecting cable (G) in the scope of delivery. Connection accessory
G 10 CLC is not required.
▶ Keep the QR code with connection data in a safe place. For this purpose, stick the
QR code onto the indoor unit or, if necessary, on the operating instructions (
Fig. 19).
▶ Download and connect app.
G 10 CL-1 – 6721824785 (2023/05)
Unit
–
–
Installation
Value
UART
IP40
31