Télécharger Imprimer la page

Dettson EVO Serie Manuel De L'utilisateur Et D'installation page 94

Publicité

Les langues disponibles

Les langues disponibles

9. Operation
Rotation & Back-up indication
When there are two units, press the button to select the rotating function,
and press "Con rm"to turn on or o the rotating function.
1. Press "Confirm" to set the rotating time,then press the button "
to set time. Setting time Range :1~99h, the default time is 10 hours.
2. Step 2 set high temperature co-open temperature -- or 26~32 degrees --
that is, this function is invalid. When the ambient temperature is 26~32
degrees, when the ambient temperature is greater than or equal to the set
temperature, the two machines will run 24 degrees at the same time in the
COOL mode.
3. Step 3 set the low-temperature co-open temperature -- or 5-15 degrees --
that is, this function is invalid. When the ambient temperature is 5-15 degrees,
when the ambient temperature is lower than the set temperature, the two
units will run at the same time for 24 degrees to make the heating mode.
4. Step 4: set which machine will run first. Select A or B.
5. After this function is turned on, as long as the air conditioner is running at
the setting hour, it will automatically turn on another air conditioner and
turn off the current air conditioner. Press the POWER button to switch to
another one immediately. A or B icons flicker to indicate the corresponding
air conditioning failure. Automatically switch to another machine when
running time is reached or machine failure occurs.
27
"or "
"

Publicité

loading