Dettson EVO Serie Manuel De L'utilisateur Et D'installation page 71

3. Installation method
1.Wired remote controller structural dimensions
120mm
2.Remove the upper part of wired controller
Insert a slot screwdriver into the
slots in the lower part of the wired
controller (2 places), and remove
the upper part of the wire controller.
(Fig.3-2)
NOTE: Do not pry up and down, you can only rotate the screwdriver.
20.6mm
Fig 3-1
Buckling
position
46mm
60mm
(Fig.3-2)
Back cover
4