Dettson EVO Serie Manuel De L'utilisateur Et D'installation page 91

9. Operation
Intelligent eye display
1.This function is valid in any mode of power-on state.
2.When the indoor unit sending wire controller has the smart eye
function, press the function key to select the smart eye mark, press
the OK key to turn on the smart eye, and light up the smart eye
mark at the same time; when the smart eye is turned off, the smart
eye mark goes out.
3.Shutdown, switch mode, turn on self-cleaning, turn on 8-degree
heating function will automatically cancel the smart eye function.
Filter reset function
After the indoor unit sends the wire controller filter usage time,
the filter cleaning prompt mark lights up, press the function key
to select the filter cleaning prompt mark, and press the OK key
to reset the filter screen time. The filter cleaning reminder icon
goes out.
24