Publicité
Les langues disponibles
Les langues disponibles
13. Fault alarm handing
If the system does not properly operate expect the below
mentioned cases or the below mentioned malfunctions is
evident, investigate the system according to the following
procedures.
MALFU N C T ION & PROT EC T ION D EFIN E
NO.
Error of communication between wire controler
1
and indoor unit
The error displayed on the wire controller are different from
those on the unit. If an error code appears, please check the
<<Owner's And Installation Manual>>and<<SERVICE Manual>>
14.Technical indication and requirement
EMC and EMI comply with the CE certi cation requirements.
D ISPLAY
D IGITAL TU BE
.
44
Publicité
