Operation; Operation Instructions - Zipper Maschinen ZI-ABH1500D Manuel D'utilisation

12

OPERATION

Device to be operated in a perfect state only. Inspect the device visually every time it is to be used.
Check in particular the safety equipment, electrical controls, electric cables and screwed connection
for damage and if tightened properly. Replace any damaged parts before operating the device.

12.1 Operation instructions

Perform all machine settings with the machine being disconnected
from the power supply!
Excessive pressure may cause material damage!
When chiselling only slight pressure is required
•
Too much pressure unnecessarily overload the motor and cause
•
damage!
Use auxiliary handles supplied with the tool
•
Loss of control can cause personal injury
Hold the machine by insulated gripping surface
•
The contact with a live wire can cause electric shock
Prior to chiselling into walls, ceilings or floors, ensure there are no
•
electric cables or conduits inside.
Checking the mains, whether they comply with the relevant national
•
standards and guidelines (especially Assemblies for Construction Sites)
Use only clean working tool. Lightly lubricate the chisel shank before
•
use with a grease.
ZIPPER MASCHINEN GmbH
ZI-ABH1500D / ZI-ABH1700D
W A R N I N G
www.Zipper-Maschinen.at
A T T E N T I O N
N O T I C E
27