Remaining Risk Factors - Zipper Maschinen ZI-ABH1500D Manuel D'utilisation

11.3 Remaining risk factors

It is important to ensure that each machine has remaining risks.
In the execution of all work (even the simplest) greatest attention is required.
A safe working depends on you!
Even if the machine is used as required it is still impossible to eliminate certain residual risk factors
totally. The following hazards may arise in connection with the machine´s construction and design:
Risk of injury to the hands / fingers by the tool and tool mount during operation.
•
Risk of injury due to sharp edges of the workpiece, especially in non-fixed with a suitable tool
•
/ device workpiece.
Risk of injury: hair and loose clothing, etc. can be captured and wound up! Safety regulations
•
must be observed with regard to clothing.
Risk of injury due to contacting with live electrical components.
•
Risk of injury due to dust emissions, treated with harmful agents workpieces
•
Risk of injury to the hearing by prolonged labor without hearing protection
•
Risk of injury to the eye by flying debris, even with safety goggles.
•
Health damage caused by hand-arm vibrations if the equipment is used over a prolonged
•
period or is not properly guided and maintained.
These risk factors can be minimized through obeying all security and operation instructions, proper
machine maintenance, proficient and appropriate operation by persons with technical knowledge and
experience.
ZIPPER MASCHINEN GmbH
ZI-ABH1500D / ZI-ABH1700D
www.Zipper-Maschinen.at
W A R N I N G
26