Recording Mode; Connecting Using The S-Video Output - Pioneer XV-DV99 Mode D'emploi

Other connections

Recording mode

The Recording mode allows you to make
analog recordings from the LINE 1 (OUT)
jacks.
When Recording mode is on, most sound-
related functions (including SURROUND,
ADVANCED, AUTO, SYSTEM SETUP)
become inactive. The display will briefly blink
RecMode On if you try and use a prohibited
function while Recording mode is on.
When Recording mode is off, the audio from
the analog output may be interrupted,
depending on the operation.
1 Press SOUND.
2 Use the (cursor left/right)
buttons to select 'Rec Mode?'.
3 Press ENTER.
4 Use the (cursor up/down)
buttons to select 'R.Mode On' or 'R.Mode
Off'.
• When Recording Mode is On a stereo
downmix of multi-channel DVD-Audio
and SACD discs is output from the
speakers and from the analog audio
jacks. Note that with some DVD-Audio
disc, only the front left/right channels are
output. When set to Off, multi-channel
DVD-Audio and SACD discs are played
through all the speakers, but front L/R
audio is output from the analog audio
jack.
• When R.Mode On is selected while
playing SACD, the unit will loose speaker
SW output and bass will become
inaudible.
Connecting using the S-video
output
If your TV has an S-video input, you can use
this instead of the standard video output for a
better quality picture.
• Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging in.
TV
E1
VIDEO
S-VIDEO
OUT
OUT
L
VIDEO
R
NE1
TV
UT
IN
XV-DV99/XV-DV990
• The S-video ouptut is switchable between
S1 and S2 formats for compatibility with
all TVs. See S-Video Out on page 65 for
more on this.
S-VIDEO
INPUT
ANTENNA
AV CONNECTOR
FM
AM LOOP
UNBAL
ANTENNA
75Ω
AUDIO
LINE1 LINE2
IN IN
12
75
En