Interpump Group 58 Serie Mode D'emploi page 10

The manufacturer INTERPUMP GROUP S.p.A. – Via E. Fermi, 25 – 42049 S. ILARIO D'ENZA (RE) – Italy
DECLARES under sole responsibility that the product identified and described as follows:
Name: Pump
Type: Reciprocating plunger pump for high pressure water
Trademark: INTERPUMP GROUP
Series: 58
Model: VHT5807 VHT5808 VHT5811 VHT5813 VHT5815
complies with Machinery Directive 2006/42/EC.
Standards applied: UNI EN ISO 12100:2010 - UNI EN 809:2009
The pump identified above meets all the essential safety and health protection requirements as listed in
section 1 of Annex I of the Machinery Directive:
1.1.1 - 1.1.2 – 1.1.3 – 1.1.5 – 1.1.6 - 1.3.1 – 1.3.2 – 1.3.3 – 1.3.4 – 1.5.4 – 1.6.1 – 1.7.1 – 1.7.2 – 1.7.4 – 1.7.4.1 –
1.7.4.2
and the relevant technical documentation has been compiled in accordance with Annex VII B.
In addition, the manufacturer undertakes to make available, following a reasoned request, a copy of the
relevant technical pump documentation in the manner and terms to be defined.
The pump should not be put into service until the plant to which the pump is to be incorporated has been
declared in accordance with the provisions of the relevant directives and/or standards.
Person authorised to compile the technical file
Person authorized to draw up the declaration:
Reggio Emilia 08/2021
DECLARATION OF INCORPORATION
(In accordance with Annex II of European Directive 2006/42/CE)
Name: Roberto Menozzi
Address: INTERPUMP GROUP S.p.A. – Via E. Fermi,
25 – 42049 S. ILARIO D'ENZA (RE) – Italy
Name : Mr. Silvio Corrias
Signature: e:
9